USB C Tester with Color Screen IPS Digital Multimeter

Product Description: Before using the PD charger, please remove the protective film. The PD charger only outputs voltage after communication is established. When testing the PD charger, ensure that the device is connected to the "USBC OUT". The working voltage of the USB resistor load should not exceed 5V, and it should not be used for more than 2 minutes without active heat dissipation. When in use, the USB resistor load generates high temperatures, so avoid touching it. It is normal for the high temperature to cause the green layer of the resistor to fall off. Please read the user manual carefully before usage. Deviations may occur due to manual measurement. Lighting may cause slight color differences between the picture and material object, so please refer to the actual product.

Specifications: - Voltage/Current measurement range: 3.60V~32.00V/0.00~5.10A - USB load : 5V 1A/2A/3A Limit 15W - Capacity/Power accumulation range: 0~99999mAh/0~999.99Wh - Power measurement range: 000.00~163.00W - Impedance measurement range: 1~999.9Ω - Temperature measurement range: 0~80°C - Timing range: 999hours 59minutes 59seconds - Input interface: Type-C/Micro USB/USB - Timing charging reminder setting: countdown 24-hour arbitrary setting - USB D+ D- Voltage range: 0V~2.99V - Mobile phone full charging reminder threshold parameters: <2W/0.5 hour - Refresh time: > 500mS/times - Measurement rate: about 0.5 times/sec - Alarm mode: siren sound+ prompt display - Screen: 1.8 inches 128160 color screen - Self-consumption current: <0.025A - Operating temperature: -10~+60°C - Item size/weight(tester only): 6.26.21.4cm / 2.442.44*0.55in /34g / 1.19oz

Packing List: - USB Tester X 1 - Crocodile Clip X 2 - USB Load X 1

Troubleshooting: - If the Type-C PD charger is not displayed when plugged into the USB meter, it is likely due to the two-way communication charging protocol of PD. The charger must establish communication with the powered device to output voltage. - When the Type-C PD is not displayed when plugged into electrical equipment, the issue may be with the Type-C line PD communication pins. Turning over the data cable or using the same brand of Type-C cable can be a solution.

High Precision Color Screen: - The USB tester features 8 interfaces and supports USB, Type-C, DC5.5, and micro USB. With a measurement accuracy of 0.00001, it can measure the voltage and current changes during the operation/charging process of various DC inverters such as mobile phones, notebooks, desk lamps, routers, and set-top boxes.

Wide Applications: - The USB tester can be used to test notebooks, car emergency power supplies, routers, and other DC products. It monitors current, voltage, power, capacity, and other charge states in real time.

Multi Functions: - Functions of the USB tester include screen flip, fast charge recognition, energy capacity detection, temperature measurement, accuracy measurement, and two-way current measurement.

Safety Protection: - The USB tester features safety protections such as over-voltage protection, over-current protection, low-voltage protection, charging time setting, and auto-off function. This ensures that appliances are maximally protected from damage.

product information: